Effect of transpiration on Pb uptake by lettuce and on water soluble low molecular weight organic acids in rhizosphere

The effect of transpiration (high and low) on Pb uptake by leaf lettuce and on water soluble low molecular weight organic acids (LMWOAs) in rhizosphere has been studied. After two weeks of growth the plants were cultured in greenhouse for more four weeks and two days. Pb(NO(3))(2) solutions of different concentrations (100, 200, and 300 mg l(-1) of Pb) were then added to the quartz sand pots of different plants and studies were initiated. Blank experiments (without treating the quartz sand pots with Pb(NO(3))(2) solutions) were also run in parallel. No significant differences in the growth of the plants with the concentrations of added Pb(NO(3))(2) solutions were observed by both low and high transpirations at the end of the 0, 3rd, and 10th days of studies. The total evaporation of the volatiles during 10 days did not depend on the concentration of Pb(2+) but with high transpiration the rate of evaporation was significantly higher than with low transpiration. Uptake of Pb by shoots and roots of the plants was found to be proportional to the concentration of various Pb(NO(3))(2) solutions added and more accumulation was observed in roots than in shoots at the end of 3rd and 10th days. High transpiration created more Pb uptake than low transpiration did. One volatile acid, propionic acid and nine non-volatile acids, lactic, glycolic, oxalic, succinic, fumaric, oxalacetic, D-tartaric, trans-aconitic, and citric acids in rhizosphere quartz sands were identified and quantified by gas chromatography (GC) analysis. D-Tartaric and citric acids were major among the non-volatile acids. The amount of LMWOAs in rhizosphere quartz sands increased with the higher amount of Pb uptake and also with the duration of studies. The total quantities of the LMWOAs in the rhizosphere quartz sands were significantly higher under high transpiration with 300 mg l(-1) Pb solution addition at the end of 10th day. The present study shows prominent correlation between transpiration and uptake of heavy metal and interesting correlation between Pb contaminated level and quantity of water soluble LMWOAs in rhizosphere quartz sands. The latter thus deserves of further studies.     

BOD-DO modeling and water quality analysis of a waste water outfall off Kochi, west coast of India

Water quality scenarios around an offshore outfall off Kochi were simulated using MIKE21 water quality model, assuming a high Biochemical Oxygen Demand (BOD=50 mg l(-1)) effluent discharge. The discharge is introduced into the model through an outfall located at a distance of 6.8 km from the shore at a depth of 10 m. Three scenarios were simulated with different discharge rates such as 2, 5 and 10 m3 s(-1), with BOD load of 8640, 21,600 and 43,200 kg day(-1) respectively. Model simulations were carried out to estimate the assimilation capacity of the waters off Kochi for the three discharge rates. The results show that for 10 m3 s(-1) effluent discharge, the initial BOD of 50 mg l(-1) reduced to 3.33 mg l(-1) at the outfall after 48 h. High BOD values were confined to an elliptical area of approximately 8 km2 around the outfall. Based on this, the assimilative capacity of the waters off Kochi in terms of BOD can be estimated as 38,000 kg day(-1). It is suggested that offshore waters could be used as a feasible alternative to the Kochi backwaters for the disposal of treated effluent.     

Colourimetric analysis and antimicrobial study of natural dyes and dyed silk

Colourimetric and antimicrobial activities of natural colourants and dyed silk have been studied. The colour strength (K/S) values were increased with increase in dye absorbance. The absorption of dyes on silk yarns was obtained from 10.56 to 39.48% at 5% concentration of dye from different plant extracts. The colourimetric parameters L¹, a¹, b¹, C, and H were measured for depth of the colour. The dyed silk with natural colourants displayed excellent antimicrobial activity (reduction rate: 25–65%) against the bacteria Escherichia coli and (reduction rate: 3–68%) against the fungal strain Aspergillus niger. The dyed silk exhibited good and durable fastness properties.     

Improved bioavailability and biodegradation of a model polyaromatic hydrocarbon by a biosurfactant producing bacterium of marine origin

Polyaromatic hydrocarbons (PAHs) are organic pollutants mostly derived from the processing and combustion of fossil fuels and cause human health hazards. In the present study a marine biosurfactant producing strain of Bacillus circulans was used to increase the bioavailability and consequent degradation of a model polyaromatic hydrocarbon, anthracene. Although the organism could not utilize anthracene as the sole carbon source, it showed better growth and biosurfactant production in an anthracene supplemented glycerol mineral salts medium (AGlyMSM) compared to a normal glycerol mineral salts medium (GlyMSM). The biosurfactant product showed high degree of emulsification of various hydrocarbons. Analysis by gas chromatography (GC), high performance thin layer chromatography (HPTLC) and Fourier transform infrared spectroscopy (FTIR) showed that the biosurfactant could effectively entrap and solubilize PAH. Thin layer chromatographic analysis showed that anthracene was utilized as a carbon substrate for the production of biosurfactant. Thus organic pollutant anthracene was metabolized and converted to biosurfactants facilitating its own bioremediation.     

Photodegradation of the herbicide penoxsulam in aqueous methanol and acetonitrile

Penoxsulam is a triazolopyrimidine sulfonamide group of rice herbicide. The phototransformation of penoxsulam was studied under UV light (lambda max >or= 290 nm) and sunlight in aqueous methanol and acetonitrile solvent system using TiO2 as sensitizer. The rate of photodegradation of penoxsulam in different solvent systems followed first-order kinetics and calculated half-lives was found to be in the range of 51.89-73.41 h and 62.70-97.09 h for UV light and sunlight respectively in the presence or absence of sensitizer. From this study, a total of six photoproducts were identified and characterized on the basis of Q-Tof micromass spectral data. The plausible mechanism of phototransformation involved were hydrolysis, photo oxidation of the sulfonamide group, breaking of sulfonamide bond, loss of amino and sulfonic acid group.     

Inter-species differences for polychlorinated biphenyls and polybrominated diphenyl ethers in marine top predators from the Southern North Sea: Part 2. Biomagnification in harbour seals and harbour porpoises

Harbour porpoises (Phocoena phocoena) and harbour seals (Phoca vitulina) were found to differ in the ability to metabolize polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Biomagnification factors (BMFs), calculated between both predators and their prey (sole - Solea solea and whiting - Merlangius merlangus), had a large range of variation (between 0.5 and 91 for PCBs and between 0.6 and 53 for PBDEs). For the higher chlorinated PCBs and the highest brominated PBDEs, the BMF values in adult males were significantly higher than in the juvenile individuals of both species. BMF values of hexa- to octa-PCBs were the highest, suggesting reduced ability to degrade these congeners. Harbour porpoises had higher BMFs for lower chlorinated PCBs and for all PBDEs compared to harbour seals. Other factors, which may influence biomagnification, such as the octanol-water partition coefficients and the trophic level position measured through stable isotope (δ¹⁵N) analysis, were found to be of lesser importance to predict biomagnification in the studied food chain.     

Utilization of Arachis hypogaea hull, an agricultural waste for the production of activated carbons to remove phenol from aqueous solutions

Arachis hypogaea hulls, an agricultural waste, were used to prepare activated carbon by chemical activation with zinc chloride under four different activation atmospheres. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. The maximum Brunquer-Emmett-Teller (BET) surface area and micropore volume of the activated carbon was found to be 418 m(2)/g and 0.28 cm(3)/g, respectively. The activated carbon developed shows substantial capability to adsorb phenol from aqueous solutions. The kinetic data were fitted to the models of intraparticle diffusion, pseudo-second-order, and Lagergren, and followed more closely the pseudo-second-order chemisorption model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. Solution pH has significant effect on adsorption and the maximum uptake of phenol was reported at pH 3.5.     

Estimating the value of improved wastewater treatment: The case of River Ganga,India

In this paper we employ a stated preference environmental valuation technique, namely the choice experiment method, to estimate local public’s willingness to pay (WTP) for improvements in the capacity and technology of a sewage treatment plant (STP) in Chandernagore municipality, located on the banks of the River Ganga in India. A pilot choice experiment study is administered to 150 randomly selected Chandernagore residents and the data are analysed using the conditional logit model with interactions. The results reveal that residents of this municipality are willing to pay significant amounts in terms of higher monthly municipality taxes to ensure the full capacity of the STP is used for primary treatment and the technology is upgraded to enable secondary treatment. Overall, the results reported in this paper support increased investments to improve the capacity and technology of STPs to reduce water pollution, and hence environmental and health risks that are currently threatening the sustainability of the economic, cultural and religious values this sacred river generates.